[Wuori]

Alerton microset 4
.
.
Download / Read Online Alerton microset 4
.
.
.

.
Setting the MAC address and BACnet devic. Top element. All information in this document is provided as is without warranty of any kind. Honeywell reserves the right to change any information herein without prior notice. No guarantees are given as to the accuracy of information. Trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Room temperature status, depending on mode of operation. Across the Room View when it is not being actively used by a room occupant or a Detail Screen view when it is being used to adjust room settings. These screens can display a wide range of information depending on Microset 4 model, configuration, and settings. Across The Room Screen View Examples. UL 916 Certified System compatibility The Microset 4 sensors work with legacy VLCs and ROCs, but also support optional new features that require a new ROC to support. For example, architects may not understand how the placement of windows, doors, air registers, printers, and other equipment impact temperature sensors. Microset 4 backplate and the wall. Figure 3 Completely cover all holes in the Microset 4 backplate to safeguard against air infiltration. Figure 5 Backplate mounting dimensions. Two screws attach the backplate to an electrical box, mud ring, or other mounting surface. See the mounting template in Figure 7. MICROSET 4 Gently tap anchors into the pilot holes until flush with the wall. Pull the wires through the wiring opening, and position the wallplate over the mounting holes. Insert the screws into the holes and tighten. The wire size is based on the length of the wire run and the current draw of the Microset 4. TP Microset 4s are being connected to. TP trunk to determine how many devices it can support. Tape off shield drain wire at other end. Mounting the wall sensor on the wallplate Insert Microset 4 tabs into backplate slots. Push bottom of Microset 4 until it clicks into position. Operational overview The Microset 4 operates in one of nine modes. In each mode, the Microset 4 displays data and has operational features unique to that mode. Operating modes are listed in Table 5 on page 20 and Table 6 on page 21. MICROSET 4 Operating mode specifics This topic provides LCD, button operation, for each of the operating modes. Use Table 5 to compare operating mode features. Use Table 6 on page 21 to determine values to set for enabling each operating mode. Office modes are typically used in commercial use environments. Screens might not appear on the Microset 4 in the order shown, or at all, depending on Microset 4 model, configuration, and settings. Hotel modes Hotel modes have a feature set typically used in the hospitality industry. The unit controls HVAC equipment to maintain space temperature within unoccupied heating and cooling setpoints. The Across the Room View screen s blank, the fan screen shows Auto, which cannot be adjusted, ad the Temperature screen does not allow adjustment of the space temperature setpoint. DOWN Screen and icons might not appear on the Microset 4 in the order shown, or at all, depending on Microset 4 model, configuration, and settings. Current Setpoint or Current Room Temperature and Current Time will alternate approximately every 4 seconds. OFF Status Unoccupied or Vacant Across the Room View screen In an unoccupied or vacant room, the default screen display is blank with the green status light on. MICROSET 4 The occupant can press the navigation arrow to scroll through the additional screens and LEFT RIGHT change their values as normal. Operation when OFF The LCD displays the word OFF. The unit controls to unoccupied setpoints. MICROSET 4 Fan speed mode HIGH Current fan speed value. MEDIUM Press the up or down arrows to increase or decrease the fan speed. If any value other than HIGH is selected, the up arrow will be visible. MICROSET 4 Air Quality screen Current CO level. AIR QUALITY Air Quality screen is active. Press the left arrow to move Press the right arrow to move to the previous screen. If ON is selected, the when when lights are down arrow will be visible. Device Instance screens in field service mode. There are no DIP switches on the Microset 4. Service Mode can be secured using an optional password when the Microset 4 is attached to a VLC with new ROC. If the Microset 4 is attached to a VLC without the new ROC support, the password screen is not available. MICROSET 4 If the password entered is incorrect, the user will see this screen. Press any key to return to the password screen. After 45 minutes of inactivity, the Password screen and the Incorrect Password screen will exit automatically. Press the Field Service, Balance, Custom Codes, or Settings button on the screen. Press the navigation arrow until the variable you want to adjust appears. MICROSET 4 Field Service mode Field Service mode enables technicians to query and adjust key operating settings in the Microset 4. MICROSET 4 To start F filexlib.
.
Alerton microset 4 lamhleabhar
Alerton microset 4 service manual
Alerton microset 4 handbuch
Alerton microset 4 instruction manual
Alerton microset 4 notice

[Autor]

Artigos