[Varvio]

.
.
Download / Read Online Impulse 49 manual
.
.
.

.
Top element. Impulse is a MIDI keyboard with a powerful DAW control surface. HUI compatible DAWs, including clip and scene launch in Ableton Live. Brand new look and feel Box Contents Novation Impulse USB Cable Getting Started Guide Software registration card About this Guide This guide is designed to help you through the basic steps in setting up your Impulse for the first time and getting started with basic DAW control. We recommend you plug the Impulse into the computer directly rather than via a USB hub. On Mac OS X the keyboard will simply connect. Install the latest Novation USB driver from novationmusic. Impulse Basic Operation Top Panel. The Impulse has aftertouch which allows you to apply pressure to keys after pressing them down for additional control over a sound if the sound supports this. FUNCTION BUTTONS These buttons are used to access deeper functionality of the Impulse. More about this is explained in the User Guide. The functions are shown by the labels in white boxes. REAPER Please note that Reaper version 5. At this point it would be good to create a new song with at least eight audio tracks. Novation is a registered trade mark of Focusrite Audio Engineering Limited. Impulse is a trade mark of Focusrite Audio Engineering Limited. Focusrite Audio Engineering Limited. Disclaimer Novation has taken all possible steps to ensure that the information given here is both correct and complete. In no event can Novation accept any liability or responsibility for any loss or damage to the owner of the equipment, any third party, or any equipment which may result from use of this manual or the equipment which it describes. English IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Novation may void your authority, granted by the FCC, to use this product. This product satisfies FCC regulations when high quality shielded USB cables with integral ferrite are used to connect with other equipment. COPYRIGHT AND LEGAL NOTICES Novation and Automap are registered trade marks of Focusrite Audio Engineering Limited. VST is a trade mark of Steinberg Media Technologies GmbH. In The Box The Impulse has been carefully packed in the factory and the packaging was designed to withstand rough handling. Should the unit appear to have been damaged in transit, do not discard any of the packing material and notify your music dealer. Impulse is connected through a standard USB cable. USB port, and not via a USB hub. Correct operation cannot be guaranteed if a hub is in use. A Thing may be hardware or software. DAW mixer or additional piece of MIDI hardware is being controlled. Their assignment to a particular parameter of the Thing being controlled will either be made automatically by Automap, or manually by you. DAW mixer level, or an additional assignable MIDI control. USB Type B connector compatible with USB 1. Connect the Impulse to a USB port on your computer using the USB cable supplied. DC adaptor here if using Impulse away from a computer. English MENU OVERVIEW Most of the configuration and setting up of Impulse is carried out through the menu system and the LCD screen. The menu system is also used to modify templates. LCD features and Menu Navigation Whilst the menus themselves vary with function, there are a number of basic principles which always apply. However, any of these may be modified for your own use if you wish. Note that in general, when using Impulse with Automap software, these templates are not used. Impulse operates in a somewhat different manner when used with Automap and this is described later in the manual. Use the Data knob to select either No or Yes, and press Enter to confirm. English Preview Preview mode is provided to confirm how a control is currently configured without actually transmitting any MIDI data to your computer or elsewhere. Enter Preview mode by holding down Shift and pressing the Controls button. The LED in the Controls button blinks to confirm the mode. Channel Aftertouch, which sends an additional set of MIDI data when further pressure is applied to a key while it is being pressed. Using Zones, it can be split into 2, 3 or even 4 separate or overlapping regions. Each Zone can have its own MIDI channel, port, and keyboard range. The remaining pages in the Zones menu repeat the settings available for Zone 1 in Pages 2 to 6. Program Change You can manually transmit a MIDI Program Change message from Impulse. MIDI Chan to enable Prog Change mode. Select the Program Change number with the Data knob and the MIDI data will be transmitted. If a single key is pressed, the note will be retriggered by the Arpeggiator. LED in the Arp button flashes in this mode. The Arpeggiator wil filexlib.
.
Impulse 49 كتيب
Impulse 49 user manual
Impulse 49 manuele
Impulse 49 handboek
Impulse 49 gebruiksaanwijzing

[Autor]

Artigos