[Mauri]

.
.
Download / Read Online Roland electronic drum set manual
.
.
.

.
X series represents a fresh generation of portable pianos. Subscribe to the Roland Newsletter to get the latest articles, videos, and news about your favorite Roland products. Read, watch, listen, and learn about Roland products and the people that use them. Get your questions answered by a Roland product specialist. Words enclosed in square brackets indicate buttons on the panel. Top element. These sections provide important information concerning the proper operation of the unit. Roland, the rack or stand must be carefully placed so it is level and sure to remain stable. If not using a rack or stand, you still need to. The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. Use with other stands is capable of resulting in instability causing possible injury. Otherwise, you will need to use equivalent packaging materials. Use a cable from Roland to make the connection. Connecting the Pads and the Pedals . Connecting Headphones, Audio Equipment, Amps, and Other Gear . Developing Internal Timing Sense. Messages for Transmitting Choking Information . Recording to an External Sequencer . Functions as a MIDI Sound Module and as a MIDI Controller. TEMPO Button Displays the tempo settings of the metronome. All Purpose Clamp can be attached to a pipe of 10. Connect the supplied AC adaptor to the AC adaptor jack. Plug the AC adaptor plug into a power outlet. Turn down the volume control on the connected amp or audio system. Turn off the power to all external devices. You can preview the sound of the currently selected drum kit. The kit preview pattern is played repeatedly. Trigger or rim indicators light up for the pad whose sound is being played. Trigger Inputs and Triggering Possibilities TOM 3 TOM 2. Playing the Pads Head and Rim Shots When Playing the Snare Head Shot Head Be sure the Snare pad is connected to the SNARE trigger input jack. Playing the Drum Kit Cross Stick on the Snare Pad Be sure the Snare pad is connected to the SNARE trigger input jack. The volume of The Foot Closed sound can be adjusted separately. Do NOT press the pedal when turning on the power. Level, Pan, MIDI Note Number Ambience Settings Ambience Type. When you change a drum kit, settings for each pad, ambience, etc. They are applied equally to all sounds in the kit. This operation will delete all settings in the currently selected drum kit. Double check before executing this function. MIX IN jack allows you to play along with a variety of external audio sources. Make connections as shown in the following figure. Headphones, audio equipment, amp, etc. Coach mode is a unique set of exercises specifically designed to help build speed, accuracy and stamina, as well as develop better timing skills. Throughout the Coach modes, you will discover that some of them have programmable parameters, allowing you to adapt the functions to your specific needs. Rhythmic Notes is an excellent warm up exercise as well as a good method for learning rhythmic note values. Down mode is designed to increase playing stamina by slowly increasing and then decreasing the speed of the click. The options are explained below. You can adjust the sensitivity of the pads to accommodate your personal playing style. This allows you to have more dynamic control over the sound volume, based on how hard you play. Eliminate this by adjusting Crosstalk Cancel on the pad that is sounding inadvertently. Power must be OFF before starting this process. About the Pads Playing the Pads Head Shots and Rim Shots To play a head shot, hit only the head. To play a rim shot, hit both the head and the rim of the pad simultaneously. With the following pads head and rim shots are available. With the following pads only head shots are available. Bell Shots Bow shots produce the sound assigned to the head and edge shots produce the sound assigned to the rim. The following pads can produce bow shots and edge shots. The following pads can produce bow shots and edge or bell shots. Bell shots are played by striking the bell somewhat strongly with the shoulder of the stick. Set each trigger input as described below. T are Roland acoustic drum triggers. This setting applies to both the head and rim. Strike the pads and press the pedals to check the following. Pad and Trigger Settings Adjusting Pad Sensitivity You can adjust the sensitivity of the pads to accommodate your personal playing style. This can be used to prevent a pad from sounding because of vibrations from other pads. In the following example, B will sound but A and C will not sound. Adjust this curve until the response feels as natural as possible. Important if you are using acoustic drum triggers. Such triggers can produce altered waveforms, which may also cause inadvertent sounding at Point A in the following figure. This occurs in particular at the decaying edge of the waveform. SNARE TRIGGER INPUT, you can adjust the sensitivity of the rim response. MIDI contr filexlib.
.
Roland electronic drum set handbog
Roland electronic drum set manuele
Roland electronic drum set manual lawn
Roland electronic drum set service manual
Roland electronic drum set manuaalinen

[Autor]

Artigos